White Smoke and Co Carbon Monoxide Detector / Alarm Oem Service
* 9V battery operated
* Photoelectric and electrochemistry Sensor
* Test and reset Button
* With factory price
* Power Supply: One 9V carbon Zinc Battery
* Sesitivity Setting:
Co: alarm density:
30ppm, alarm not activate within 120 minutes
50ppm, alarms within 60-90 minutes
100ppm, alarms within 10-40 minutes
300ppm, alarms within 3 minutes
Smoke: 1%-5%/FT OBS
* Standby Current: <25uA
* Alarm Current: < 45mA
* Operation Ambient condition: 5-40 degree and 20%-90% R.H.
The product is smoke and Co detector, it is used for detecting
smoke and Co. Advanced photoelectric and heat sensor is adopted to
ensure high stability and long life. . The product is suitable for
the safety of residential house, villas, hotels, markets, boarding
The smoke and co detector alarm used to detect the smoke and co,
which are widely used in household, kitchen and hotel.
9V Battery Backup
Photoelectric and Heat
10% ~ 95% Relative Humidity (RH)
Working Temp. Range
-10°c ~ +50 °c
Sound&Flash Alarm; 85dB/3m
Smoke Sensitivity: 2.06%/ft, Temperature trip point: Fixed
* Loud 85 decible alarm.
* Permanant carbon monoxide sensor.
* Powered by one 9V battery.
* The alarm sound pattern is pulsed four short alarm beeps for co
alarm and continuous beeps for smoke alarm.
The sound pattern is smoke pattern as co and smoke occur
simultanously. The red LED will flash while in alarm mode.
* One 'chrip" every 30 seconds is an indication that the battery is
low (Need replacement) or the unit is malfunctioning.
* Test Button to test units monthly.
* Green and red LED light that indicate normal operation and alarm
* The unit will sound ‘chrip" and red LED flashes once as powered